Good deals
Welcome to the Good Deals category of our website! Spend some time here, in order to find earlier versions of microcontrollers, electronic components and even high performance servomotors! Don't hesitate to come back often to see our latest deals!
Good news for all Raspberry Pi enthusiasts: the Raspberry Pi Zero WH board offers all the features of a Pi Zero, plus an already soldered GPIO 40-pin header!
With the Raspberry Pi PoE HAT, you can use a simple Ethernet cable to power your Raspberry Pi 3 B+ through compatible Power over Ethernet networks.
Equip your board with a mini camera for Raspberry Pi Zero and experiment with new video projects.
This high-quality acrylic case will protect your Raspberry Pi 4 from scratches and dust, while giving easy access to all its ports.
Available exclusively at Génération Robots, the Pixl board was made for using Dynamixel XL-320 motors on a Raspberry Pi designed for the Poppy Ergo Jr educational robot. Not compatible with Raspberry Pi 3B+.
Make your DJI Tello drone’s flights less risky with this propeller guard set. It will protect both your device... and anyone it might hit!
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
Use the proper bolts for fixing your Dynamixel servos!
This 3P Cable Set for Dynamixel servo motors in the AX and MX series lets you make all the standard connections between your robot and the various sensors and actuators that it needs.
The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.
This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.
The CS-10 color sensor can detect up to 6 colors.
This set of four 150 mm 2P Cables (Gearmotor) is a reliable means of connecting your gearmotor to its battery housing.
This pack of four 5P cables (150 mm) from Robotis makes it easy to connect your robot sensors.
This 150 mm 2P Cable (Battery Box) (x 4) set by Robotis allows you to establish a secure connection between your servo motors and their battery housing.
4 cables (400m length) with 5 pin connectors for some Dynamixel servomotors, sensors and controllers (CM-100, CM-150, CM-530, CM-700).
The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!
This cable for SICK laser range finders has a 12-pin female connector for quickly connecting your installation.