Dynamixel modules and pieces
All accessories allowing you to power, command and attach Dynamixel servomotors to build mobile robots and robotics arms.
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
10 cables (6cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
The LBC-010 charger for LiPo battery allows to recharge the LBS-10 LiPo battery of the Premium Bioloid kit.
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
The PS-10 SMPS charger allows you to power your Dynamixel controllers and servomotors.
The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.
The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.
Support set for RX-64, EX-106+, MX-64 and MX-106 Dynamixel servomotors
10 cables (10cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
The DYD (DYNAMIXEL Drive) is a high-precision gear known for its exceptional impact resistance.
Supplier Reference: 902-0164-000
The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.
Mounting plate for Dynamixel smart actuators that is compatible with RX-64, EX-106+, MX-64 et MX-106 actuators.
The SMPS2Dynamixel allows you to power your Dynamixel servomotors if you don't use a controller.
The GS-12 gyro sensors allows your Dynamixel or Bioloid mobile robots to kwnow their angular speeds on two axis.
DYNAMIXEL TRAINING (DYD) is a high-precision gear with superior shock resistance.
Supplier Reference: 902-0165-000
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
Dynamixel Drive DYD for Dynamixel-P servomotor is a high-precision Robotis gear that is ideal for its superior impact resistance.
The BT-410 USB Bluetooth dongle enables you to establish communication between your robot and your PC via the BT-410 slave module.